Connect network internet. Ways to connect to the Internet

To access the Internet, there are several ways to connect it, which differ from each other, in fact, by the connection technology itself, tariffs for use, as well as technical specifications, which determine both the speed of information transfer, and the stability of the connection itself, and the response time, and other subtleties. As you can see, the quality of the Internet depends not only on the hardware capabilities of the computer or mobile device used, as some believe. The quality of the Internet connection itself is the responsibility of the providers of this service - special organizations, the so-called providers.

But, about everything in more detail - we will consider below the most common methods of connecting to the Internet, their features, advantages and disadvantages.

1. Satellite Internet

2. Mobile Internet

The name itself speaks for itself. This is the Internet that you can use wherever you are in the coverage area of the provider (mobile operator). There are two connection options here: via a mobile phone or via a special modem. The latter can be connected to a smartphone, tablet or laptop via USB ports (miniUSB) as a separate small device. Manufacturers often equip some models of computer and mobile equipment with such a modem.

Almost all modern mobile phones have Internet access. Somewhat outdated models are connected via slow and, at the same time, expensive GPRS technology. But for more modern mobile devices- smartphones and tablets - mobile operators offer high-speed connection technologies that are able to provide Internet access wherever there is coverage of this operator. These are such technologies as: CDMA, WiMAX, LTE, UMTS. If the gadget is not equipped with a built-in modem capable of supporting these technologies, almost all mobile operators can offer their own branded connected modem.

The data transfer speed of these technologies can vary greatly in different user locations. However, now special Internet signal amplifiers are being produced that are capable of increasing this speed by several times.

3. Telephone connection (dialup)

This is by far one of the most common ways to connect to the Internet in Russia, but far from the best. It is used in the event that a landline telephone is connected to the apartment. By connecting a computer or laptop via a wired modem to a telephone line, you get access to the Internet. The phone at this time, of course, will be busy, and it will not be possible to use it until the end of the session on the Web. And this is not the only drawback of a telephone connection - for example, this method of Internet connection is one of the most expensive, and perhaps the slowest.

4. WiFi

Wi-Fi (Wireless Fidelity) is one of the modern types of wireless communication. Almost all smartphones, tablets and laptops have a built-in special module that allows you to access the Internet while being in the coverage area of Wi-Fi access points (usually the range is about 100 m). The Wi-Fi module can also be purchased separately and connected to a PC as a separate built-in board, or as an external device connected via USB.

So far, this type of connection is not in great demand among Russian users, despite the fact that many, by connecting a network Internet cable to a router, could freely move around the house with a laptop, tablet or smartphone and use the Internet. In Russia, Wi-Fi is more of an additional feature for service business. Users can (as a rule, absolutely free of charge) have access to the Internet in various public places - at airports, train stations, cafes, hotels, gas stations, etc.

By itself, Wi-Fi technology is quite fast, but due to the fact that access points are usually overloaded, the final speed sometimes leaves much to be desired.

5 ADSL

ADSL is a special type of Internet connection over a telephone line, while Internet access does not interfere with the phone's operation in any way. The quality of such a connection is an order of magnitude higher than with a conventional telephone connection. It has a high transmission rate and excellent stability.

6. Direct connection

This is the best way to connect to the Internet today. The user's computer is connected to the provider by a regular network cable. The advantages of this connection are its high speed, stability, reliability, and low cost. But this method is available, unfortunately, only in large settlements - where the cable lines of local providers pass.

And today we will look at the devices with which we can access the Internet.

Ways to connect to the Internet

First, let's look at the most common ways to connect to the Internet:

1. local computer network or ethernet(sometimes called fixed Internet access);

2. Through a telephone line(ADSL and Dial-Up);

3. Mobile access(GPRS, EDGE, 3G);

4. Through cable TV(DOCSIS).

Each of these methods has its own advantages and disadvantages.

Conclusion

In this tutorial, we looked at the main devices for connecting to the Internet. I did not touch on satellite Internet and other, more exotic options, so as not to overload you with specific information (the lesson was not small anyway).

If there are any unclear points or additional questions, write in the comments, we will try to figure it out.

Reminder of the opportunity to receive news about fresh IT lessons yourself on email . To do this, follow this link, and then confirm your subscription in the email you received.

Copying prohibited

There are a fairly large number of types of connections to the Internet provider. Below are the main ones:

1. LAN connection

In this case, the user connects via a normal Ethernet local area network. No additional connections or login/password entry is required. This type further subdivided into:

a) Dynamic - DHCP or "dynamic". The simplest type, no settings are required and the user simply connects the computer with a cable, which receives all the settings automatically

b) Static -"fixed IP address" or "static". In this case, the "Internet Protocol TCP/IPv4" parameters must be pre-configured according to the settings provided by the ISP, which usually include the IP address, subnet mask, gateway, and DNS server(s). For example, this type is used by the TDS + provider in Volokolamsk.

Sometimes in both subtypes can be used binding by MAC address(in this case, the router is usually required to support the so-called MAC Cloning or MAC Spoofing - substitution or change of the MAC address on the Internet port).

2. VPN connection

In this case, the user connects through the so-called. VPN (virtual private network) with the need to specify a login and password. This type has subdivisions:

a) PPPoE. To connect to the Internet, you need to create a connection through the setup wizard by selecting "Connect to the Internet" -\u003e "Set up a connection manually" and select PPPoE in the settings.

b) PPTP. To connect to the Internet, you need to create a connection through the setup wizard by selecting "Connect to a workplace" -\u003e "Connect to a virtual private network (VPN)", then specify the address of the VPN server.

c) L2TP. Another type of connection that is gaining popularity. The setting is similar to PPTP, only after creating a connection, you need to select "L2TP IPSec VPN" in its properties on the "Network" tab.

The type of VPN connection can also be found by clicking on the connection icon in the tray (with active Internet) and selecting the "Details" tab.

3. Combined connection type

The most complex type, common, in fact, only in Russia (with rare exceptions). The bottom line is to combine a LAN connection with a VPN connection to provide so-called. dual access- dual access, i.e. access to the Internet and internal resources of the provider (peer-to-peer networks, IPTV, etc.). Accordingly, various combinations of (1) and (2) can be used, namely:

a) PPPoE + Dynamic. The Internet is provided via PPPoE, the local address in the provider's network is obtained automatically. Usually, routes are also dynamically distributed to access certain resources through a particular interface (using the so-called DHCP option). For example, this type is used by the Chehov.NET provider

b) PPPoE + Static. The Internet is provided via PPPoE, the local address in the provider's network is set manually, statically. Routes are also written manually using the "route add ..." command in the "cmd" console.

c) PPTP + Dynamic. The Internet is provided via PPTP, the local address in the provider's network is obtained automatically. Routes can similarly be distributed dynamically through the DHCP option or manually registered (rarely).

d) PPTP + Static. The Internet is provided via PPTP, the local address in the provider's network is set manually, statically. Routes are also written manually.

e) L2TP + Dynamic. The Internet is provided via L2TP, the local address in the provider's network is obtained automatically. Routes can similarly be distributed dynamically through the DHCP option or manually registered (rarely).

f) L2TP + Static. The Internet is provided via L2TP, the local address in the provider's network is set manually, statically. Routes are also written manually.

P.S. Determining your type of Internet connection will help you set up your wifi router or Wi-Fi hotspot.

The most common ways to connect to the Internet today are:

Modem connection (Dial-up access) - Dial-Up, ADSL
Leased line connection (fiber, etc.)
GPRS - access (via cell phone)
radio access
Satellite Internet

All of them differ from each other in the principle of operation, data transfer speed, reliability, complexity of setting up equipment and, of course, price. The main characteristic of any Internet connection - data transfer rate - is measured in the amount of information transmitted to the user per unit of time (per second) and is usually measured in kilobytes / sec (KB / s) or kilobits / sec (kbps). For high-speed channels, the speed measurement is already in megabits or megabytes per second.
In principle, pastime on the Internet can be divided into two groups - requiring a large amount of traffic and not requiring it. For web surfing (browsing), the speed of a regular modem connection is sufficient. However, this speed will not allow you to comfortably download large files - movies, high-quality music, and so on. Therefore, to fully use the possibilities of the Internet, high-speed access is required.

Modem connection (dial-up)

The oldest and most widely used connection method, but is now gradually being replaced by others. Modem (dial-up) connection is now relatively popular only in cities where there is not a wide choice of providers.
With this method of connection, the user each time to access the Internet will have to use a modem to dial through the telephone line to the provider's modem pool. This is where the first disadvantage of dial-up comes from - the busyness of the telephone line while on the Internet. Next, the provider processes the user account name (login) and password and checks them. Then the subscriber is assigned a free IP, thanks to which he gets access to the Network.
The advantages of such an Internet connection are: ease of setup and installation of equipment (only an analog modem is required), low price of equipment, and many tariff plans offered by providers.
There are many more disadvantages of a modem connection. As noted above- the subscriber's telephone line is busy, the data transfer rate is low (usually 3-4 KB / s), and the connection and data transfer quality is poor due to the wear and tear of telephone lines.
With the speed provided by a modem connection, it is almost impossible to download large files from the Internet - videos, distributions of large programs, and so on.

Required Equipment

Analog modem - from 300 (internal) to 1000 (good external) rubles.
Connection - most providers are free.

ADSL

More promising than dial-up at present is the ADSL (Asymmetric Digital Subscriber Line) technology. This is a technology that allows you to provide high-speed telephone calls over ordinary analog telephone lines. broadband access in Internet. At the same time, the speed reaches 8 Mbps. Besides this technology does not load the subscriber's telephone line due to the separation of signal ranges in the telephone line. The subscriber also does not need to call the provider. Cons - a rather high cost of traffic - 2-2.5 rubles / MB.

Required Equipment

ADSL - modem (splitter is usually included) - from 600 to 2000 rubles.
The right to connect for the population - up to 1000 rubles. (depending on the region).

GPRS connection

Due to the rapid development cellular communication in Russia, almost every person has a cell phone. Why not use it to access the Internet? Almost all providers today offer the service of using cell phone instead of a traditional modem. At the same time, free channels of the mobile operator are used to access the network.
For the user, such an Internet connection is good because, with the support of GPRS phone from additional equipment only a communication device is required mobile phone with a computer (USB cable, infrared or Bluetooth). The advantage is also the mobility of this type of connection.
The data transfer rate depends on the mobile operator and the equipment used, but in general it is also low - only two times higher than the modem one.
The defining disadvantage in the first place is the high cost of traffic received by the user (5-7 rubles / MB).

Required Equipment

USB - cable, infrared port, Bluetooth - about 400-500 rubles.

Leased line connection

The provider conducts a leased line (twisted pair or optical fiber) to the subscriber's computer and issues a range of IP addresses for the subscriber to access the Internet.
At the same time, the user receives a free telephone line, a constant connection to the Internet, high quality connections and data transfer, high speed (up to 100 Mbps).
However, the cost of installing and configuring such a connection directly depends on the distance of the computer to the connection point. a, and, in any case, is quite large compared to other connection methods. And when moving the computer to another place, you will again have to lay a cable to it.

Required Equipment

In this case, the user only needs a network card from the equipment, and at present it is available on almost any of the motherboards.

radio access

Wireless way to connect to the Internet. Everything is installed at the provider and the subscriber necessary equipment(special radio modem, antenna), with the help of which information is exchanged between the user and the Internet.
The disadvantages of radio access are the need to purchase expensive equipment and a high subscription fee to the provider. The quality of the connection and data transfer depends on the weather and the visibility of the base transmitting station.
Its advantages include high connection speed (up to 2 Mbps) and subscriber mobility (that is, the ability to connect a subscriber device to another computer).

Required Equipment

Antenna - about 2000 rubles.
Indoor module (radio modem) - the price range is quite large

Separately, it is worth noting the connection via Wi-Fi, for which only a Wi-Fi module is needed (cost - up to 2000 rubles), but ... in the regions there is practically no Wi-Fi coverage area.

satellite connection

Satellite connection is one-way (asynchronous) and two-way. The second due to the high cost of equipment (the bill goes to tens of thousands) will not be considered by MirSovetov.
Most often, satellite Internet is called an asynchronous (or combined) access method - data is received by the user through a satellite dish, and requests (traffic) from the user are transmitted by any other connection - GPRS or terrestrial channels (ADSL, dial-up). The main requirement for the request channel is the reliability of the connection. In most cases the best choice for it is an ADSL connection with free outgoing traffic.
Benefits of satellite Internet connection y - first of all, this is a very low cost of traffic - from 10 to 100 kopecks per 1 megabyte. The cost of a set of equipment and connection is currently affordable for almost everyone (especially compared to other access methods) and is approximately 200-300 US dollars.
Data transfer speeds vary greatly depending on provider and data plan. selected by the user. Satellite Internet providers offer a very wide range of tariff plans, including unlimited ones. A very nice bonus is also the possibility of free reception of satellite TV.
The disadvantage of satellite Internet connection is the need the presence of a channel for outgoing traffic - a telephone line or a telephone with GPRS support. However, now it is not such a big problem.

Required Equipment

Antenna 90 cm with a bracket - about 2000 rubles.
DVB card (satellite modem) SkyStar2 - 1800 rubles.
Converter - 700 rubles.
Cable - 100 rubles. (10 m)
Installation, configuration - 1700 rubles.

It is worth noting that in major cities Russia due to the growing competition of providers and development local networks Internet access is getting cheaper. Often you can install unlimited access to the Network with a decent speed and a subscription fee of 500-1000 rubles / month. In the provinces and small towns, this is much more difficult and prices are an order of magnitude higher. The best choice in this situation would be to use satellite Internet.
Finally, some math. Let's calculate the approximate cost of downloading a certain amount of information from the Internet. When using modem (dial-up) Internet access with time-based payment per hour, theoretically, you can get (download) 6 * 3600 = 21600 kilobytes, or 21 MB. In practice, this figure is in the region of 15-17 MB. Now let's calculate:
Modem (dial-up) access - 20 MB - 20 rubles (fee per hour).
ADSL access - 20 MB - 40 rubles (Volgatelecom) (tens of times faster than modem access).
Satellite Internet- 20 MB - from 2 to 20 rubles, depending on the download speed and time of day.
That's basically it, the choice is yours, enjoy your Internet experience.

There are two types of internet connection today. The first type is a wired connection that uses a cable called twisted pair to connect. The second type is a Wi-Fi connection that provides an Internet connection using radio waves. Wi-Fi connection has become widespread in our time. However, wired Internet has a number of advantages that are relevant in large organizations and offices. At home, it also makes sense to make a wired connection to at least one computer. For a stable internet connection and effective work connection settings must be configured correctly.

Benefits of a wired internet connection

Over the past 15 years, the Internet has rapidly penetrated into all spheres of our lives. It is necessary in banking, trade, manufacturing, and is also indispensable for the exchange of information and personal communication. The most common ways to connect to global network today are a wired connection and a Wi-Fi connection.

For a wired connection, use optical cable or twisted pair. The first type of cable has a significant advantage, as it provides information transfer rates up to 1 GB per second. Over twisted pair, the speed limit reaches 100 MB per second.

The speed of information transfer through the cable depends on its type and on the network card that receives the signal. This affects the operation of desktop computers, game consoles, TVs and other devices connected in one network. Streaming information does not require constant exchange between devices, which significantly increases the processing speed. Speed in a local connection between workstations is of great importance when working in a corporate network. This is taken into account if there is a need to quickly transfer a large amount of information.

With a Wi-Fi connection, the connection to the Internet is carried out using radio waves operating in a certain range. Therefore, Wi-Fi is more in demand on household level. It is convenient because it allows you to immediately connect to the Internet from a smartphone, tablet or laptop anywhere where there is an access point. However, signal reception is affected by neighbor devices operating in the Wi-Fi connection frequency band and objects in the path of radio waves.

A Wi-Fi connection does not require any cabling, but it is highly susceptible to radio interference, and the farther you are from the access point, the worse reception signal

A wired connection has several advantages over wireless:

the speed of receiving and sending information with a wired connection is about 2 times higher than that of Wi-Fi;
when exchanging files with the server, the delay is minimal, which is important in online games that require top speed actions from the user;
wired connection is more resistant to interference in the network; it is not affected by gadgets operating on the Wi-Fi frequency band or nearby sources of electromagnetic radiation;
signal strength at wired connection does not depend on obstacles in the way of passage and the influence of external factors.

Errors that occur when connecting a wired connection can be indicated by codes that indicate the cause of the problem.

Video: why a wired Internet connection is better than Wi-Fi

How to connect a cable to a computer or laptop

Even an unprepared user can connect an Internet cable to the computer's network adapter connector on their own. For connection, a standard cable (twisted pair) with crimped RJ-45 connectors on both ends of the cable is used.

You can connect the cable as follows:

Prepare a network cable of the required length.
Connect one connector to any LAN port on the router.
First, connect the cable connector to any LAN connector on the router
Connect the other connector of the cable to the laptop or computer connector.
Now you need to connect the second cable connector to the computer's LAN connector
When using an older type of modem, connect the incoming ISP cable to the yellow Internet connector on the modem.
In old-style modems, the provider's cable should be connected to the yellow modem connector
Connect the connecting LAN cable to any Ethernet port of the modem and to the network port of the device.
The connecting cable from the device must be connected to the modem's Ethernet connector
After connecting the computer to the router, the indicator LED on the latter will light up, signaling the establishment of a connection between the devices.
When connected to a computer, the indicator LED on the indicator panel of the router will be lit

Connecting the cable is not a big problem, since all connectors have connectors that fit only into the corresponding sockets on the computer's connector panel. It is extremely difficult to make a mistake in this process even for a novice user.

Dynamic and static internet connection

After connecting the cable connectors and building a connection between the computer's network adapter and the provider's equipment, you can debug the Internet connection. First of all, you need to choose a way to connect to the backbone network, based on specific goals. There are 2 connection methods:

dynamic connection is a method in which an individual IP address assigned to a computer is configured automatically and changes when the initial settings are transformed. The equipment of the provider company independently assigns the values of the network address and the default gateway to the computer. When connecting a computer to a trunk line, the connection to the global network occurs immediately, without requiring additional input of identification data from the user. The only inconvenience with such a connection is the possible representation of a remote connection to your address. In this case, you must first connect to the trunk line directly, bypassing the router;
a static connection is a connection method when an individual IP address provided to a computer remains constant and is indicated when concluding an agreement with a provider company. During such a connection, the user sets the address in manual mode, and also independently prescribes the values \u200b\u200bof the main gateway and DNS servers. If such information is not in the contract, then you can find it in the department technical support provider company. Some ISPs may require you to enter a username and password for online licensing. This information, as a rule, is indicated in contractual documents or is determined by the subscriber independently.

How to create a dynamic connection

For right creation dynamic connection, you must perform a series of sequential steps:

From the Start key menu, navigate to Network Connections
In the "Settings" section that opens, in the "Change network settings" block, select "Configure adapter settings".
In "Options" go to the option "Configure adapter settings"
In the Network Connections console, right-click on an Ethernet connection.
Select "Properties" from the menu that opens.
Select "Properties" from the Ethernet connection drop-down menu
In the connection console, highlight the IP version 4 (TCP/IPv4) component and click Properties.
In the properties panel, select the line IP version 4 (TCP / IPv4), and then open "Properties"
In the TCP/IPv4 Protocol Attribute Console, check the "Obtain an IP address automatically" and "Obtain DNS server address automatically" radio buttons.
In the last step, activate the switches "Obtain an IP address automatically" and "Obtain DNS server address automatically"
Click OK to complete.

The dynamic connection is now ready to use.

How to create a static connection

To create a static connection, you need to follow these steps:

Everything, the static connection is established.

Currently, most subscribers home internet a dynamic connection is used, since the main method is to connect through a router. A static connection is used for a dial-up connection or a direct connection.

When using an ADSL modem connection, only static addresses assigned by the ISP are used.

Video: Create a Static and Dynamic Connection

How to set up an L2TP connection in Windows 10

The L2TP tunnel protocol used to connect to the global network is a symbiosis of the old PPTP protocols from Microsoft and L2F from Cisco. It is easily processed network devices and has a high speed of information exchange due to a decrease in the load on the processor. It has great connection stability and high security. Able to create tunnels to work in any networks. The L2TP protocol is usually used in corporate networks, as it allows you to create a network connection over an existing network. This provides a stable connection between the main office of the organization and regional offices.

To set up an L2TP connection, you need to perform a series of sequential steps:

Right-click on the "Start" icon.
In the menu that appears, click on the "Network Connections" line.
From the Start menu, select "Network Connections"
In the "Settings" section that opens, select "Network and Sharing Center".
Under Settings, open Network and Sharing Center
Here, select the "Create a new connection or network" option.
In the menu of the "Network and Sharing Center" section, select the first item - "Create a new connection or network"
In the "Set up a connection or network" panel, select the "Connect to a workplace" line and click "Next".
Select the line "Connect to a workplace", then click "Next"
In the Desktop Connection console, select the Use My Internet Connection (VPN) tab.
Click on the "Use my internet connection (VPN)" tab to continue the setup
In the console that opens, enter the server address, check the box next to the option “Allow other users to use this connection” and click “Create”.
Enter the server address and do not forget to check the box next to the last item to allow other users to use the connection
In the console that opens, enter your username and password, then connect to the backbone network.
Go to "Network Connections".
Right-click on the generated VPN connection.
Select "Properties" from the drop-down menu.
In the console, right-click on the generated VPN connection and go to "Properties"
In the VPN Connection: Properties console tabs, open the Security option.
Set the VPN Type field to L2TP with IPsec (L2TP/IPsec), and select optional in the Data Encryption field. After that, open "Advanced Options".
VPN type must be set to L2TP with IPsec (L2TP/IPsec), select "optional" for data encryption
Enter the key provided by the ISP for authentication.
The authentication key must be provided to you by your ISP
Click OK to complete.

If you did everything correctly, then the L2TP connection is ready for use.

Video: how to set up an L2TP connection in Windows 10

The created L2TP connection increases the security level for the subscriber and makes it easier to connect to the provider's equipment.

How to set up a PPPoE connection in Windows 10

The PPPoE Internet connection protocol is used when connecting to a backbone network using Ethernet technology. This method has a number of advantages, for example, a spread spectrum additional features, compression of information during transmission, carrying out authentication and encryption operations with information packets. Connection requires authorization on the network (entering a username and password). Used for direct connection to the backbone network and provider equipment.

To connect to the Internet using the PPPoE protocol, you need to perform a number of operations:

Open the Network and Sharing Center.
Here select "Create and configure a new connection or network".
In the "Network and Sharing Center" section, click on "Create and configure a new connection or network"
In the "Set up a connection or network" console, select "Connect to the Internet" and click "Next".
Select the first item - "Connect to the Internet" and click "Next" for further settings
Select the High Speed (with PPPoE) tab.
In "Internet connection" select the connection "High speed (with PPPoE)"
Next, enter the login and password received from the provider, and click "Connect".
Enter the login and password received from the provider and click "Connect" to complete the setup

You now have a PPPoE connection established.

Video: how to connect and configure a PPPoE connection

Giving permission to other users to use the connection is only worthwhile when installing home Internet, since the number of users is limited.

Ways to troubleshoot wired internet connection problems

When connecting a wired Internet, errors periodically occur due to hardware problems, a break in the backbone network, or incorrect user actions. In most cases, connection problems arise due to the careless actions of the user himself.. To determine and eliminate the cause of the problem, you need to perform simple steps according to the following algorithm:

Launch "Network and Sharing Center".
In the "Network Connections" tab, select "Troubleshooting".
Go to "Network and Sharing Center" and open the "Troubleshooting" section
Select Internet Connections.
For further settings, select the "Internet Connections" option
Next, click on the "Run the troubleshooter" line.
Wait for the problem detection process to complete
After the process is completed, in the window that appears, select the "Troubleshoot Internet Connection" tab.
Select "Troubleshoot Internet Connection" and wait for the diagnostic process to complete
At the end of the troubleshooting process, close the console if no problems are found. If problems are found, follow the further instructions in the pop-up windows.

Run the troubleshooter by clicking on the appropriate line

After the verification process is completed, in the Incoming Connections console, select Find this computer on the network and click Next.
Check the "Locate this computer on the network" box and continue troubleshooting with the "Next" button
The troubleshooter will check if the firewall is blocking this computer from the network.
Wait for the network gateway configuration check to complete
During the troubleshooting process, follow the instructions that appear on the console.
If no problems are found, close the console.
If problems are found, follow the program instructions to fix them.

This completes the check for incoming connections.

The following instructions show the detection of one incoming connection problem. More detailed information about the problem can be found by clicking on the "View additional information" line.

The above method for finding connection errors is a classic and was developed by Microsoft specialists. In reality, everything is much simpler, since the problem with the Internet connection can be caused by other reasons that are eliminated mechanically.

This algorithm helps to fix the problem with no internet connection in most cases:

Restart your computer.
Disconnect the router from the network and wait 10-15 seconds.
Turn on the router.
If the connection is not restored, click on the Reset button to reboot the router.

To avoid problems with your Internet connection, it is recommended to periodically disconnect the router from the network and give it time to recover.

Video: fixing an error when connecting wired internet

Nowadays, all ISPs prefer to establish a dynamic connection to the backbone network. This is more convenient for the network subscriber and for the provider company, since it does not require reconfiguration of parameters in case of any changes in the network equipment. If you plan to often use remote access to your computer, then, of course, it is better to choose a direct connection, bypassing a router or modem. For home Internet, you can always change the router settings and the type of connection that were originally installed by the provider's specialists. In the future, when the system configuration is changed or a complete reinstallation, the network parameters are set automatically. With a direct connection, the settings will need to be set manually. All this must be taken into account by users when choosing the type of Internet connection.